Best Case For 9800x3d

This mid-tower ATX case belongs to the mainstream segment and targets builders assembling air-cooled or AIO-cooled systems around current high-power GPUs.

The InfiniRail mounting rails stand out by allowing continuous positioning of fans or radiators along the front and roof, giving precise control over intake paths without drilling.

Build quality centers on a perforated steel front panel with a three-dimensional Y-pattern that maintains rigidity while lowering airflow impedance compared with traditional mesh.

At this price point the case omits aluminum accents and tool-less GPU brackets common on higher-tier models, requiring standard screws for most installations.

Buy this case if you value flexible fan placement and modular future upgrades. Skip it if you prefer a fully assembled out-of-box experience with no additional parts needed.

Case clearance: Graphics cards up to 430 mm long fit when no front fans are installed; with fans mounted the limit drops and builders should verify specific card dimensions.

Radiator placement: The InfiniRail system supports dual 360 mm radiators in front or roof positions by sliding mounts along the steel rails.

Motherboard compatibility: The chassis accommodates standard ATX boards and explicitly lists support for reverse-connection models from ASUS, MSI, and Gigabyte for hidden cable routing.

Side panel options: Install the internal panel as a cable cover for clean builds or remove it to mount additional fans on the motherboard tray side for increased airflow.

This Regetek rolling hard case is a mid-tier protective container sized for cameras, drones, tools, and sensitive electronics. Its market position sits between basic tool boxes and premium flight cases.

IP67 waterproofing combined with a pressure equalization valve provides reliable sealing when the case is submerged or exposed to heavy rain. The pluck foam system lets users shape compartments for specific gear without additional cutting tools.

Build quality centers on heavy-duty injection-molded polymer with a continuous steel hinge and five latches. Roller wheels and the retractable handle support rolling transport while three side drag handles allow two-person lifts.

Trade-offs include substantial total weight once foam is installed and the absence of pre-installed locks. The fixed interior height of 9.65 inches may limit taller stacked items.

Buy this case if you need a wheeled, lockable, watertight container for frequent equipment moves. Skip it if you require lighter carry or a taller interior clearance.

This is an ATX mid-tower case in the mainstream price tier aimed at gamers and builders who want straightforward airflow and lighting without complex custom loops.

The four included 120 mm ARGB PWM fans provide the primary cooling, with published airflow and pressure figures that place the case in line with other mid-tower options using similar stock fans.

Build quality centers on tempered glass side panels and a metal chassis with toolless latches on both sides for quick access during assembly or upgrades.

At this price point the case lacks dust filters on all intakes and does not include a vertical GPU mount, which are common omissions in the budget-to-midrange segment.

Buy this case if you need a simple, fan-equipped ATX chassis with a display platform and 420 mm GPU clearance; skip it if you require extensive dust filtration or a pre-installed vertical riser.

GPU clearance: The case supports graphics cards up to 420 mm long, covering nearly all current consumer cards including those with factory overclock coolers.

CPU cooler height: Maximum cooler height is listed at 178 mm, sufficient for most dual-tower air coolers and 360 mm AIO pumps when mounted at the top.

Motherboard support: Back-connect ATX and Micro-ATX boards are explicitly supported, allowing clean cable routing behind the tray.

Radiator mounting: A 360 mm radiator fits at the top, with the pre-installed fans able to be relocated or supplemented for push or pull configurations.

This is a mid-tower glass case positioned for builders who want visible components and straightforward cooling. It targets users assembling systems around reverse-connection motherboards while maintaining EATX support and 360 mm radiator clearance.

The defining feature is the trio of RS120-R reverse rotor ARGB fans that push air inward yet keep lighting unobstructed. Typical builds using this case achieve strong front-to-top airflow when additional fans or a 360 mm radiator are added to the roof or side mounts.

Wraparound tempered glass panels and removable front and side sections create an open build experience. The interior layout includes double-shot grommets and cable hooks that help keep wiring tidy behind the board tray.

At this price tier the case offers fewer included fans than some competitors and relies on the buyer to expand cooling if needed. The glass construction also means less sound absorption than mesh-heavy alternatives.

Buy this case if you prioritize a clean reverse-connection motherboard build with strong glass visibility and basic fan support. Skip it if you need maximum out-of-box fan count or prefer fully mesh airflow without glass trade-offs.

Motherboard compatibility: Works with ASUS BTF, MSI Project Zero, and Gigabyte Project Stealth boards that place connectors on the rear surface.

Radiator and fan planning: Side, roof, and PSU mounts accept up to ten 120 mm fans or multiple 360 mm radiators for custom loops.

GPU installation: The included Anti-Sag Stabilization Arm supports long graphics cards common in EATX builds.

Cable routing: Double-shot grommets and cable hooks are positioned for reverse-connection motherboards and iCUE LINK systems.

This is a mid-tower ATX case featuring genuine walnut wood accents and five pre-installed PWM fans including two 170mm front units. It targets builders assembling standard ATX systems who want visible wood trim and out-of-box airflow without extra fan purchases.

The 170mm front fans and reversed-blade 120mm units provide substantial intake volume typical for mid-tower cases at this tier. Expect adequate cooling headroom for mainstream CPUs and GPUs when paired with a decent air cooler or 240mm AIO.

Build quality centers on the wood inlays and matte black finish. Toolless fan brackets and dual PSU mounting positions support straightforward assembly and cable management for back-connect boards.

Trade-offs include potentially restricted radiator options on the front due to the large default fans and a chassis depth that may not suit the smallest desks.

Buy this if you want wood accents and strong front airflow in an ATX build. Skip it if you need extensive radiator support or a fully mesh front without wood elements.

Case size and motherboard fit: Standard mid-tower ATX layout accepts full-size ATX boards and supports back-connect variants for hidden cabling.

PSU installation: Choose front-facing or rotated orientation for PSUs up to 220mm long to optimize cable routing.

Fan configuration: Default 170mm front fans can be raised for CPU-directed airflow or kept low for balanced GPU cooling without tools.

Front intake considerations: Large 170mm fans occupy space that may interfere with 360mm radiator mounting on the front panel.